|
|
|
 |
PP-R Welding Machine
This welding machine is particularily suited to the joining of our pipes and pipe fittings. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Seamless Stainless Steel Pipe And Tube
We are supplying various kinds of seamless stainless steel pipe and tube with the diameter from 6mm to 426mm and wall thick from 0.5mm to 25mm. The pipes and tubes are made of 304/304L,316/316L,310S(OCr 25Ni 20,2520),904L,2205,317L,347H,321, Monel, GH3030...
|
 |
Rudder Horn
A rudder horn is the part used to attach the rudder to the ship's main body Manufacturing capacity: Up to 20 tonages. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Prepainted Galvanized Steel Sheets
Produced confirming to JIS G3312 (1991). The process entails the coating of GI sheet with zinc phosphate, followed by the roll coating with special paint two coat (two bake system) in high temperature oven under the stringent quality control. Range of P...
|
 |
Round And Deformed Bar
Our factory engages in the manufacturing of steel bar, wire rod and downstream industry with production capacity of 500,000 metric tons annually and highly advanced technology machinery which worth more than 1,200 million baht from danieli, italy. Produ...
|
 |
Black Annealed Steel Wire
Soft quality Oiled or dry 5-25-50 - 500-1000kg coils available If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Galvanized Steel Sheets
Machine designs by: Nippon steel corporation Process: Continuous hot dipped gal. Type of process: Non-oxidizing furnance process Production cap.:160,000 mt/y Raw material: Coil rolled coil Thickness:0.19-1.20mm. Width:575-1225mm. Incoming co...
|
 |
PP-R/Al/PP-R Composite Pipe
Description: 1) D20 x 2.8 2) D25 x 3.5 3) D32 x 4.4 4) D40 x 5.5 5) D50 x 6.9 6) D63 x 8.6 Advantages: 1) Greatly reduced linear expansion coefficient, only 1/4 that of PP-R Pipe 2) 100% oxygen tightness, very suitable for heating system...
|
 |
Female Thread Connector
Description: 1) 16 x 1/2 2) D20 x 1/2 3) D20 x 3/4 4) D25 x 1/2 5) D25 x 3/4 6) D32 x 1 7) D40 x 11/4 8) D50 x 11/2 9) D63 x 2 Advantages: 1) Very good resistance to prolonged stresses combined with pressure and temperature 2) Lo...
|
 |
Diesel Box Body
Features: 1) Material: imported aluminum 2) Used for diesel box bodies If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Sewing Machine Accessories
Features: 1) Material: imported aluminum 2) Used for sewing machine accessories If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Aluminium Adhesive Tape
Features: 1) Used for refrigerator production 2) Can make as per customers' technical requirements 3) Various thickness and widths available Packing: Can be wooden box (for export) or carton If this offer has interested you, please, fill the ...
|
 |
Tee and Cross Union Press Fittings
Features: 1) Type: equal tee, reducing tee, male tee, female tee, cross union 2) Sizes: 1014-6075 If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Metal Wire Mesh Discs
We are capable of supplying various metal wire mesh discs; single-layer and multi-layer ones are both available. Regarding multi-layer mesh discs, the number and arrangement of welding spots can be produced according to your specific requirements. We ca...
|
 |
Pure Nickel Wire (Nickel Wire)
Features: 1) Physical parameter: a) Wire diameter: 0.035 ~ 0.20mm b) Pure nickel has the ability to withstand relatively high temperatures without deterioration. Maximum operating temperature is approximate 600 eg; C c) Nickel wire is availabl...
|
 |
Metal Fittings and Parts
Features: 1) Suspension clamps 2) Strain clamps 3) Link fittings 4) Unwire fittings 5) Busbar support 6) Clamp power cable Packing: Cartons If this offer has interested you, please, fill the form of inquiry and you receive the answer ...
|
 |
MU Sleeve
The ceramic sleeves produced by TFC have the specialties of high intensity, low insertion loss and strong ageing resistance. Features: 1) Pull out force: control in 1.0N-2.0N 2) Insertion loss: 0.2d B 3) Service life: ?1,000 times Remarks: we c...
|
 |
Brass Nipples
Supply various kinds of copper fittings (solder joint copper fittings, tin-circle free joint copper fittings, air-conditioner copper fittings, compression threaded brass fittings). There are integrated specifications for the fittings. All the products ...
|
 |
Slot Stainless Steel
Features: 1) Size: 40 x 20-300 x 300 2) Product material: 304 0Cr 18Ni 9, 304L OOCr 19Ni 10, 321 1Cr 18Ni 9Ti, 316 OCr 18Ni 12Mo 2, 316L OOCr 17Ni 14Mo 2, 310S OCr 25Ni 20 3) Standards: customers' requests available 4) Supply ability: 2,000MT/mo...
|
 |
Stainless Steel Yarn (Stainless Steel Wire 316l)
Features: 1) Japanese raw material: AISI 316L stainless steel 2) Physical parameter: a) Wire weight/spool: 500 ~ 800g/spool b) Thickness: 0.016 ~ 0.070mm 3) Characteristics: a) More corrosion-resistance and excellent straightness b) Uniform ...
|
 |
Hydraulic Hose Fitting
Features: 1) Hydraulic tube fittings / adapters made according to SAE J514, SAE J1453, BSI5200, DIN 2353, DIN 3865 standards 2) Our products of hydraulic tube fittings and adapters enjoy high reputation in the American and European big chains of i...
|
 |
Seam Stainless Steel Tube
Features: 1) Steel grade: 304, 304L, 316, 316L, 321, 310, 310S 2) Size: 219-120 x 2.5-22mm 3) Standards: ASTM A268/A, 268M-1996, ASTM A269-1996 ASTM A789/ A759M-1995, GB/T12771-2000. GB/T12770-2002, HG20537, customers' requests available 4) Su...
|
 |
Electromagnetic Clutches, Brakes For Machine Tools
Electromagnetic clutches and brakes for polish, german, czech, romanian, russian, bulgarian machine tools EMA- DESSAU - (KL, KLDO, KLDX,3KL,4KL), FUM-(VHT, VHA, VAC, VAG, ETM, VBA, VEP, VAB), HEID (FOV, FZV, MZZ), PSP POHONY(ELS, ELK, EKA, EKT, ELB, EKB...
|
 |
PE / Steel Transition with Thread
Specifications: 1) Size: PE25 / DN20 - PE315 / DN300 2) Working stress: 1.25MPa 3) Material: PE80 4) Color: to meet customer's requirements 5) SDR11 If this offer has interested you, please, fill the form of inquiry and you receive the answ...
|
 |
Steel Moulding Plate
Features: 1) Various kinds of steel structure parts, including steel frames and grates, steel forms, and steel moulding plates 2) Material: as customers' requirements 3) Painting or hot dip galvanizing If this offer has interested you, please, fi...
|
 |
Flail
Features: 1) Used together with shackles to connect to the mower 2) Material: according to customers' requests If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Pulley Components
Features: 1) Used for special tool of high-sky stringing in the electric utility 2) Aluminum alloy casting, light weight, portable, reasonable structure, strength reaches the requirement of high-sky operation 3) Able to manufacture all kinds of mo...
|
 |
Electronic Organ
we can supply all kinds of magnets according your requests. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Magnetic Plate Separator
Plate separator (psm) picks up occasional ferromagnetic particles in the product, transferred on pneumatic transport. Psm series feature a directional magnetic field, covering the open flow area of the pneumatic transport, where the product is moving. T...
|
 |
Engine Cylinder Head and Cylinder Block
Features: 1) Manufacturing with the combination of channel sand core and permanent mold 2) Full aluminum cylinder block without steel sleeve, nanometer carbon tube composite coating on cylinder wall, small friction on cylinder wall, output great...
|
 |
Magnetic Olive Balls
We can supply all kinds of magnetic balls and adjust products according to customers' requests. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Motorcycle Cylinder Head and Cylinder Block
Features: 1) Manufacturing with the combination of channel sand core and permanent mold 2) Full aluminum cylinder block without steel sleeve, nanometer carbon tube composite coating on cylinder wall, small friction on cylinder wall, output great...
|
 |
Rigging UT Wire Clip
Features: 1) Materials: malleable casting, carbon steel, stainless steel, alloy steel 2) Sizes: 6.6 - 16mm If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Magnetic Segments
We can supply all kinds of magnetic segments, rings and pieces, and adjust products according to customers' request. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Crusher Parts
Various kinds of spare parts for crushers, such as countershaft boxes, jaw plates, crown gears, impact plates, frames, locking nuts, sealing rings, bowls, pinion gears, slag pots, mantles / concaves, u-bolts, and adjustment rings. If this offer has i...
|
 |
Roundish Stainless Steel Welded Empaistic Pipes and Tubes
Features: 1) Materials of stainless steel: a) 201 J4 (approx. 0.9% - 1.1% Nickel,14 - 15% Chromium) b) 202 (approx. 3% - 5% nickel, 16% - 17% chromium) c) 304 (approx. 7% - 9% nickel, 17 - 19% chromium) d) 316 (approx. 9% - 11% nickel, 15% - 17%...
|
 |
Round Stainless Steel Welded Pipes and Tubes
Features: 1) Materials of stainless steel: a) 201 J4 (approx. 0.9% - 1.1% Nickel,14 - 15% Chromium) b) 202 (approx. 3% - 5% nickel, 16% - 17% chromium) c) 304 (approx. 7% - 9% nickel, 17 - 19% chromium) d) 316 (approx. 9% - 11% nickel, 15% - 17%...
|
 |
Magnetic Bar
We can supply all kinds of magnetic bars and adjust products according to customers' requests. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Brass Fittings for Multi-layered Pipes
We can supply different brass valves such as ball valves, gate valves, and stop valves. Additionally, we offer PPR brass inserts and other related brass accessories. If this offer has interested you, please, fill the form of inquiry and you receive...
|
 |
DIN Standard PVC-U Water Supply Pipe and Fitting
Features: 1) Diameter: 20-110mm 2) Color: white 3) All threads in fitting are BS Standard 4) Please contact us for more information about our wide variety of DIN standard PVC-U water supply pipes and fittings If this offer has interested you, p...
|
 |
PPR Pipes with Aluminium
Our PPR / aluminum composite pipe is composite of five layers, inside and outside layers of which are made of PP-R, tightly bonded with melt adhesive to the mid-layer of aluminum core which is longitudinally welded in an overlapping way. The inside and ou...
|
 |
DIN Standard PVC-U Drainage Pipes and Fittings
Features: 1) Diameter: 50-250mm 2) Color: light grey, white 3) All threads in fitting are BS Standard 4) Please contact us for more information about our wide variety of DIN standard PVC-U water supply pipes and fittings If this offer has inter...
|
 |
Sheet Metal Fabrication for High-tech Products
We supply a variety of sheet metal fabrication for high-tech products. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Stainless Steel Bars, Alloy Steel Bars, Stainless Iron Bars
Features: 1) Materials: stainless steel, alloy steel, martensitic stainless iron 2) Surface: CD, RT, ST, black 3) Sizes: 9 - 150mm 4) Standards: ASTM standards A484, A182, JIS 4303, JIS 3214 If this offer has interested you, please, fill the fo...
|
 |
PEX-AL-PEX Pipes and Fittings
DESO pipe is a composite pipe of five layers. The inside layer is made of PE, laser butt-welded by an aluminum layer, then covered by the outside PE layer. Between the aluminum layers are the bonding adhesive layers. All layers are extruded in one ste...
|
 |
PVC-U Electrician Insulation Sleeve
Features: 1) Diameter: 16-40mm 2) Please contact us for more information about our wide variety of DIN standard PVC-U electrician's insulation sleeves If this offer has interested you, please, fill the form of inquiry and you receive the answer...
|
 |
Sheet Metal Fabrication
We supply a variety of sheet metal fabrication for ventilation facilities. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Martensitic Stainless Steel Tubes
Features: 1) Grade of steel: 410, 410S, 420J1, 430 2) OD: 18 - 760mm 3) Thickness: 1 - 20mm 4) Length: 12m Packing: Bundles, seaworthy wooden cases or according to customers' requirements If this offer has interested you, please, fill the ...
|
 |
PE-RT (Polyethylene of Raised Temperature Resistance) Pipe Fitting
Features: 1) Good thermal stability and long-term pressure resistance 2) Good processability 3) Flexibility and easy installation 4) Good impact strength and reliability 5) Link by welding, easy installation and repair 6) Higher cost performan...
|
 |
Water Supply Schedule 80 Fitting
Features: 1) Available from 1/2-2 2) Color: dark or light grey 3) Made in CPVC and UPVC, both materials are imported from the USA If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
