|
Minerals, Metals and Materials Business Directory <<
Metallurgy Machinery <<
Grinding Mill
 |
|
Grinding Mill
|
|
|
|
Grinding Mill:
The machine (also called Raymond grinding mill) is used to grind barite, calcite,
potash feldspar, talcum, marble, limestone, and ceramic, whose Mohs hardness is
below 7 and humidity does not exceeds 6%. They are all non-inflammable and non-explosive stuff. The product size is adjustable as required in the range of 0.613-0.033mm. Now this series have a high ratio in home market. They are popular with the cosmic company, the mineral factory. The powder is extremely fine.
Load the material for grinding evenly and continuously into the grinding chamber
of the main frame. Due to the centrifugal force in rotation, the roller swings outward
and presses closely upon the ring. The shovel carries the material to the
space between the roller and ring. When the roller rolls, the material is thus
ground.
After being ground, the material is routed to the sorter along the wind belt of the
blower and the coarse powder will be put back to the mill for regrinding. The
fine powder flows into the cyclone collector together with airflow and is expelled
from the discharge pipe as final product.
In the grinding chamber, since the material may contain moisture to some extent,
the heat generated during grinding makes the moisture evaporated and the pipeline
joints are not airtight, the external air is sucked in and the circulation air
amount increases. In order to enable the mill to work under negative pressure,
the increased airflow is guided to the deduster anew sequentially to the atmosphere
after purification.
If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP. |
|
|
|
|
Similar Products
|
|
|
